Let us discuss your project.
Tell us about your application and inquiry.
Solar Mounting Systems
Solar Mounting Systemsare structures designed for the installation surface, combining durability, efficiency, ease of installation, watertightness and appearance. The most common mounting systems used to integrate panels and make the most of solar energy are “Roof mounting systems” and “Ground-Mounted Systems”. Both have different applications and play an important role in solar energy generation. Whatever the roof type or mounting system, panel durability and a long service life are important. Safe and correct installation is equally essential.
Rooftop Solar Mounting Systems
Rooftop solar mounting systemsare suitable for both new buildings and existing structures and help meet their energy needs sustainably. There are generally 2 installation methods. The rail-based method uses Mounting rails and profiles. Solar panels are mounted on aluminium rails. The system supports the panels in the plane specified in the layout. Panel orientation, tilt and maintenance access are considered together in the project. A purlin-connected system attaches directly to the supporting purlins beneath a pitched roof, using studs or threaded rods. Solar panels are then installed on the structure assembled from aluminium profiles.
Pitched Roof Systems
Pitched roof systems allow solar panels to be mounted on roofs with a consistent slope. They aim to use roof areas efficiently while adding energy generation to an existing building. General information on roof systems is provided below.
Tile roof
Tiles are a traditional and widely used roofing material. Solar energy systems are integrated into tiled roofs using specialised mounting systems. Roof hooks are attached to suitable load-bearing points beneath the covering. The panels are supported on profiles connected to the hooks. Installation details are selected to suit the roof and protect both the tiles and the waterproofing.
Sandwich Panel Roof
Sandwich panels are structural panels with an insulating layer between two metal sheets. Solar panels are fitted using mounting systems specifically designed for sandwich panel roofs. These systems secure the panels in accordance with the roof's load-bearing arrangement; the capacity of the existing structure is checked separately.
Standing-seam roof
A standing seam roof is a roof type particularly popular in modern architecture. Solar panels are usually secured with mounting profiles and seam clamps. Mounting systems designed specifically for standing seam roofs allow the panels to be fitted correctly without damaging the roof.
Shingle roof
Shingles are a roofing material widely used on homes. Solar panels are installed with mounting systems specifically designed for shingle roofs . These systems secure the panels safely while preserving the integrity of the roof.
Onduline Roof
Onduline is a lightweight, durable roofing material with a corrugated profile. It is commonly used for lightweight structures and roof coverings. Solar panels are installed using mounting systems specifically designed for Onduline roofs. These systems position panels with appropriate connections and a suitable supporting arrangement. The adequacy of the roof structure is assessed separately.
Trapezoidal Sheet Roof
Trapezoidal sheet is a roofing material often selected for industrial and commercial buildings. It is usually made of steel and is durable. Solar panels are installed using specialised trapezoidal sheet mounting systems. These systems secure the panels firmly to the roof.
Flat-Roof Systems
Flat roofs are used across large areas. Panels on these roofs are usually installed with fixed or ballasted systems. Optimum panel positioning requires careful planning. Panels can face in one direction or use an east–west arrangement. Flat roof systems can be grouped as follows:
Ballasted System
A ballasted system is designed to mount panels without damaging or penetrating the roof. Ballast secures the panels' mounting feet. These weights hold the panels in place and increase resistance to strong winds and other external effects. As part of its tailored service, Fixus designs and manufactures flat-surface solar mounting systems with close tolerances for the specified tilt and panel dimensions.
Anchored System with Threaded Rods
An anchored system secures solar panels to the roof surface with studs or threaded rods. Threaded fixings and waterproofing products secure the mounting feet. This method transfers loads to the supporting structure through the connection points. The existing roof capacity is checked together with the system and panel weights and wind and snow effects. Connection penetrations receive waterproofing details appropriate to the roof covering. Fixus manufactures tailored connection components for the specified tilt and panel dimensions.
Barrel-Vault Roof Systems
Some modern buildings use barrel-vault roofs. They provide an attractive appearance and may offer suitable space for solar panels. Panel installation on a barrel-vault roof must be designed to suit its slope and curved geometry.
Barrel-Vault Sandwich Panel Roof
Barrel-vault sandwich panel roofs reflect a design approach often selected for modern buildings. This roof type is assembled from panels with inner and outer surfaces made of different materials. Our barrel-vault sandwich panel mounting systems are developed specifically for these roofs, taking account of roof structure, ease of installation and watertightness.
Curved standing seam roof
Barrel-vault standing seam roofs reflect a traditional, elegant design. They are used especially on historic buildings and distinctive architectural projects. Our barrel-vault standing seam roof systems are developed for straightforward solar panel installation without damaging the roof structure. Both barrel-vault roof systems can be designed and installed to accommodate solar panels. The appropriate mounting system should be selected with regard to the roof structure, local conditions and energy generation objectives.
Ground-Mounted Systems
Ground-mounted systems are used to install solar panels on large plots or open areas. They are generally used in large-scale solar power plants.
Fixed System
Fixed mounting systems hold panels at a constant angle and position. They are used on the ground. Panel maintenance and monitoring are easier, but the system does not track the sun to maintain the optimum angle.
Tracker System
Solar tracking systems aim for high efficiency by moving panels to follow the sun. Single-axis and dual-axis systems are used. Dual-axis systems move in both horizontal and vertical axes to follow the sun throughout the day. Single-axis systems move around one axis; its direction and tilt depend on the selected design.
Agricultural Irrigation System
When using these systems, the terrain, sun angle, local irrigation needs and energy generation objectives should be considered. Choosing the correct mounting system is essential for energy efficiency and long-term operational sustainability. Fixus helps select the supporting structures for solar power plant panels to suit the application and project requirements. With our specialist team, Fixus Solar Montaj Sistemleri stands out in the solar structures sector. As solar energy leads the energy transition, we are proud of our role in this industry. Pitched roof and ground-mounted systems are fundamental to the efficient use of solar energy. Correct infrastructure design, installation angles, mounting techniques and durable materials support a long service life and high performance. Pitched roofs increase the generation potential of existing buildings, while ground-mounted systems are suitable for large energy projects.
Irrigation is essential for productive agriculture, and energy costs are an important factor. Solar energy offers a suitable solution for reducing energy costs and improving the environmental sustainability of irrigation systems. Irrigation powered by solar panels improves energy efficiency and delivers long-term savings.